Filter
Top Products
10. ViewScape Configuration
Width active pixels
The number of pixels that are really used (= the actual width of the image/video that will be shown) This
value is normally given in the source specifications. If not, adjust until full image is displayed (no missing
pixels).
Height active pixels
The number of lines that are really used (= actual height of the image/video that will be shown). This value
is normally given in the source specifications. If not, adjust until full image is displayed (no missing lines).
Total number of pixels in line.
The total number of pixels in a line (= max. width).
total= (hor. Start active pixels) + (width active pixels) + (number of trailing blanking pixels).
Total number of lines in field.
The total number of lines in a field (= max height).
total=(vert. Start active pixels) + (height active pixels) + (number of trailing blanking lines)
Pixel Clock (kHz)
The clock speed of the processing unit.
HSyncWidth
The width of the horizontal sync signal.
VSyncWidth
The width of the vertical sync signal.
Frame Rate
Vertical frequency of the input signal.
Defaults for the selected preset
To return to the defaults for the selected preset, press Defaults for xxxx. Where xxxx is the value entered
in the presets input field.
10.2.4 Pattern Generation
Overview
• Overview and activation
• Test pattern set up
10.2.4.1 Overview and activation
Overview
The digitizer can generate patterns for testing purposes.
Different available patterns are:
• Bytelevel : a one color pattern
•Crosshatch
• HRamp : horizontal bars
• Multiburst : pixel on, pixel off pattern
• Blocks : block pattern
•VRamp:verticalbars
R5976476 VIEWSCAPE TOOLSET 01/07/2004
91