Filter
Top Products
3. Configuration Wizard
Image 3-26
Configuration message
Click OK to proceed.
Click Cancel to perform an autodetect.
3.3.11 Updating the co nfiguration
What will be done?
The wizard parameters will be uploaded to the hardware.
Image 3-27
Update wizard parameters to hardware
Slave direct
slave is directly connected to the previous digitizer by usin
g the sync clock of the previous one.
Slave resync
slave is directly connected to the previous digitizer but the sync clock is restored.
28 R5976476 VIEWSCAPE TOOLSET 01/07/2004