Filter
Top Products
3. Configuration Wizard
4. Is the result OK?
If yes, go to step 5
If no, follow the set up procedure in the installation manual of the projector and continue then with step 5.
5. Check the radio button in front of Result is OK and click Next>>.
Image 3-29
Activate multiburst pattern
Image 3-30
Update test pattern log window
Image 3-31
Visual output check
How to proceed for analog output
1. Check
the checkbox Activate multiburst pattern to check the output projectors (image 3-29).
2. Click on Next>> to activate the pattern.
Alogwin
dow will be displayed in which you can follow the process.
3. Visually check the test pattern on the screen. It should look like the test pattern on the test page.
(image 3-32)
4. Is the result OK?
If yes, go to step 8
If no, fol
low the set up procedure and continue with step 5.
5. Click on Step1. (image 3-33)
Consult the
user manual of your projector to adjust the timing values (clock settings). Adjust until the
number of bands are zero or almost zero.
6. Click on step2. (image 3-34)
Adjust the phase of the projector until a sharper images appear without motion. Consult the user manual
of the projector to find out how to adjust the phase.
30
R5976476 VIEWSCAPE TOOLSET 01/07/2004