Barco R5976476/03 Computer Accessories User Manual


 
2. Installation
2. INSTALLATION
Overview
General Requirements
Software installation
•Startingup
•Closing
2.1 General Requirements
Before you begin
It assumes you are familiar with the Windows operating system at your site.
The CD-ROM in your package contains a Windows-based installation program. You can install the soft-
ware from the CD-ROM.
System requirements
A minimum configuration of a Pentium II processor, 160 MHz and 128 MB of RAM.
At least 50 MB of disk space. A CD-ROM drive.
The operating system required is a 32 bit Windows version:
Windows NT 4.0. with service pack 4.0
Windows 2000
•WindowsXP
Microsoft Internet Explorer 5.5 or higher
The screen resolution of the software is 1024*768 for a good working environment.
2.2 Software installation
To install
The process of installing your software involves the following basic steps:
1. Insert the CD-ROM in the CD-ROM drive.
2. Is the AutoPlay active on your PC.
If yes, continue with step 8.
If no, from within the Windows environment go to the Start Menu and right click on Start.
3. Select explorer.
4. Select the CD-ROM Drive.
5. Double click ‘setup.exe’ file. Follow the instruction of the install shield.
6. Press Next to run the installation.
7. Select an installation folder and click on Next.
R5976476 VIEWSCAPE TOOLSET 01/07/2004
7