Filter
Top Products
11. Input Slots for ViewScape
Image 11-9
What can be adjusted?
This window consists out of 4 parts:
• Image processing
• Resolution Settings
•RGBContrast
• RGB Brightness
11.8.2 Image Processing
DDC Resolution
Configure the RGB input with VESA standard. There are five selectable resolution setup values that can
be recognized by the graphic card through DDC communication.
VGA 85Hz refresh rate
SVGA 60Hz refresh rate
XGA 60Hz refresh rate
SXGA 60Hz refresh rate
SXGA 75Hz refresh rate
SXGA 85Hz refresh rate
UXGA 60Hz refresh rate
The graphic card will boot up in the selected display mode as far as the selected display mode is within
the card’s capabilities.
Clamp Place
To proper
ly digitize the incoming signal, the dc offset of the input must be adjusted to fit the range of the
A/D converter. Most Graphic systems produce RGB signals with black at ground and white at +0.75V.
With this setting you can program the number of pixel times that should pass after the trailing edge of
HSYNC b
efore clamping starts.
Range 0 - 255
116
R5976476 VIEWSCAPE TOOLSET 01/07/2004