Filter
Top Products
11. Input Slots for ViewScape
Clip To Subblack will filter spurious LSB’s in low lights under black-level, to prevent that spurious pixels
appear in black planes, even after Dynamic Image Stabilization.
De-interlacing Mode
Select between Median/Filmmode or Line Repetition.
The Median/Filmmode is effective when the source signal has interlaced fields between frames.
The Line Repetition is effective for a non-interlace field sources (static images). The lines of the odd field
will be doubled to obtain a complete image.
For normal video, Median/Filmmode should be selected.
Filmmode
Toggle between ON/OFF for either switching the Filmmode on or off.
Select ON to enable 2 to 2/3 to 2 pull down processing....
Select OFF to force the processing to normal ...
Film Detection Sensitivity
Select the level at which the filtered response for film content should be driven at. Useful for noisy video
content.
Film Detection Threshold
Select the level at which the film detection and processing is activated. Four levels exist. Use
ful for noisy
video content.
Freeze
Freezes the content of this source only.
Color Matrix
Select a Color Matrix suitable for the material being viewed:
AUTO Automatic adapted to incoming source, depending on measured raster frequency
EBU
European Standard (PAL/SECAM)
ANSI American Standard (NTSC)
Video Feed
Two possible choices:
•YUV
•RGsB
Select the input type which ha
stobedisplayed.
Banner Protect
Banner protect ON or OFF. Is only effective when Filmmode detection is in the ON position.
With banner protect ON, the bottom 1/4 of the lines will not be processed in Filmmode detection. That
avoid scrolling banners or
“ticker tapes” causing FILM mode errors.
Color Transient Improvement (CTI)
CTI sharpen the transient between two next to each other projected colors. The degree of improvement
can be adjusted with the slider bar.
When on 0, the image is disp
layed without CTI. 7 represents the sharpest CTI.
R5976476 VIEWSCAPE TOOLSET 01/07/2004
101