Filter
Top Products
3. Configuration Wizard
5. Select with your mouse the actual indicated value.
6. Enter a new value with the keyboard.
The entered value will be de maximum possible overlap.
7. When finished with the setup, click on Next>> to continue the set up.
Configuration set up
This pane indicates on line the possible configurations with the real dimensions.
1. Select the radio button in front of the desired configuration. (image 3-10)
2. Click Next >> to continue the set up (see "Current Configuration", page 19).
Image 3-10
Configuration selection
3.3.3 Creating a configuration starting from last saved file
What is possible
When a wizard is stopped somewhere in the procedure and the result at that moment was saved, it is
possible to restart from that saved file and continue with the wizard. Follow further the instructions of the
wizard.
How to start
1. Select Open last file / start from last settings....(image3-11)
2. Click Next>> to continue the set up.
The current configuration window opens. Continue with see "Current Configuration", page 19.
Image 3-11
Starting from last file
3.3.4 Current Configuration
Overview
The current set up gives a small overview of the chosen configuration.
R5976476 VIEWSCAPE TOOLSET 01/07/2004
19