Filter
Top Products
Specifying Common Settings
5-22
Customizing Settings
5
Adjusting the Print Density
You can adjust the density scale if differences between the image on the original
and the print occur.
NOTE
The default setting is in the middle '5', on a scale of 1 to 9.
1
Press [Additional Functions] ➞ [ ] or [ ] until
<COMMON SETTINGS> appears ➞ press [OK].
If necessary, see the screen shots in steps 1 and 2 of "Initial Function at Power
ON," on p. 5-15.
The <COMMON SETTINGS> menu appears.
2
Press [ ] or [ ] until <PRINTER DENSITY> appears ➞
press [OK].
The <PRINTER DENSITY> menu appears.
3
Press [ ] or [ ] to adjust the density from light (-LT) to
dark (DK+) ➞ press [OK].
The Printer Density is adjusted.
4
Press [Stop] to return to the Standby display.
OK
Additional
Functions
OK
COMMON SETTINGS
5.PRINTER DENSITY
PRINTER DENSITY
-LT DK+
OK
PRINTER DENSITY
-LT DK+
COMMON SETTINGS
6.AUTO DRAWER SELCT
Stop