Filter
Top Products
List of Error Messages
8-37
Troubleshooting
8
FINISHER PAPER JAM/OPEN LEFT COVER
Cause Paper jam has occurred in the finisher.
Remedy Open the left cover and check for jammed paper.
INITIALIZING...
Cause This message is displayed when the main power is turned ON.
Remedy Wait until the message disappears.
LOAD PAPER
Cause The paper drawer is out of paper, or not inserted correctly.
Remedy Insert the paper drawer as far as it will go or load paper.
MEMORY FULL
Cause The machine’s memory is full of scanned documents.
Remedy Divide the original into some stacks and scan them one by one.
NO APPROPRIATE SIZE
Cause Although <AUTO> is selected when copying, paper of suitable size is not set in
the paper drawer nor on the stack bypass.
Remedy Select the paper size, or set the copy ratio.
If you press (Start) while this message is displayed, the paper with the least
margin is selected automatically and printing starts.
NO CONTROL CARD/INSERT CONTROL CARD
Cause The control card is not inserted into the card reader.
Remedy Insert the control card into the card reader.
NO DOCUMENT/CHECK FEEDER
Cause No document is loaded in the feeder.
Remedy Load a document in the feeder.