Filter
Top Products
Routine Cleaning
7-31
Routine Maintenance
7
3
Press [ ] or [ ] until <FEEDER CLEANING> appears ➞
press [OK].
4
Place 5 sheets of blank paper into the feeder ➞ press [OK].
Make sure that you fan the sheets of paper well.
Use LTR paper.
After the cleaning is completed, the screen returns to the Standby display.
The feeder is clean. Try scanning again.
Transcription Roller Cleaning
If the back side of paper is smudged with printing, the transcription roller in the main
unit may be dirty. Should this occur, use the Transcription Roller Cleaning function
to clean the transcription roller.
1
Press [Additional Functions] ➞ [ ] or [ ] until
<ADJUST./CLEANING> appears ➞ press [OK].
If necessary, see the screen shots in steps 1 and 2 of "Automatic Feeder
Cleaning," on p. 7-30.
The <ADJUST./CLEANING> menu appears.
2
Press [ ] or [ ] until <TRANS. ROLR CLEAN> appears
➞ press [OK].
The machine starts the transcription roller cleaning.
After the cleaning is completed, the screen returns to the Standby display.
OK
ADJUST./CLEANING
4.FEEDER CLEANING
SET 5 SHEETS IN ADF
PRESS OK KEY
OK
SET 5 SHEETS IN ADF
PRESS OK KEY
CLEANING
PLEASE WAIT
OK
Additional
Functions
OK
ADJUST./CLEANING
1.TRANS. ROLR CLEAN
CLEANING
PLEASE WAIT