Canon 2016 All in One Printer User Manual


 
Specifying Common Settings
5-24
Customizing Settings
5
3
Press [ ] or [ ] to select <COPY>, <PRINTER>, <FAX>,
or <OTHER> press [OK].
<FAX> appears only if the optional Super G3 FAX Board is installed.
NOTE
<OTHER> is used for specifying the paper source for printing reports.
4
Press [ ] or [ ] until <STACK BYPASS> or the desired
paper source appears press [OK].
5
Press [ ] or [ ] to select <ON> or <OFF> press [OK].
Repeat steps 4 and 5 to make settings for the other paper sources.
Details of each item are shown below.
<ON>: The paper source is eligible for APS/ADS.
<OFF>: The paper source is ineligible for APS/ADS.
The APS/ADS is set.
NOTE
Regardless of the stack bypass setting, you cannot select 'OFF' for all of the paper
sources at the same time. At least one of the paper sources, besides the stack
bypass must be set to 'ON'.
6
Press [Stop] to return to the Standby display.
OK
AUTO DRAWER SELCT
1.COPY
COPY
1.DRAWER 1
OK
COPY
5.STACK BYPASS
STACK BYPASS
OFF
OK
STACK BYPASS
OFF
AUTO DRAWER SELCT
2.PRINTER
Stop