Canon 2016 All in One Printer User Manual


 
Timer Settings
5-41
Customizing Settings
5
Auto Sleep Time
If the machine remains idle for a certain period of time (after the last print job or a
key operation is performed), it enters the Sleep mode. You can specify the time it
takes for the machine to enter the Sleep mode (from 3 to 30 minutes). You can also
set Auto Sleep Time to 'OFF'.
NOTE
The default settings are 'ON' and '5 MIN.'.
To enter the Sleep mode manually, press the control panel power switch.
The machine will not enter the Sleep mode when:
- the machine is in operation.
- all paper cassettes are empty.
- there is a paper jam.
- the toner cartridge is empty.
The machine will recover from the Sleep mode when:
- you press the control panel power switch.
- printing reports.
- a fax is received.
- the Delayed Transmission mode initiates.
- a print job is sent from a computer.
- a print job is sent via the network.
1
Press [Additional Functions] [ ] or [ ] until <TIMER
SETTINGS> appears press [OK].
If necessary, see the screen shots in steps 1 and 2 of "Current Date and Time," on
p. 5-38.
The <TIMER SETTINGS> menu appears.
2
Press [ ] or [ ] until <AUTO SLEEP TIME> appears
press [OK].
The <AUTO SLEEP TIME> menu appears.
OK
Additional
Functions
OK
TIMER SETTINGS
3.AUTO SLEEP TIME
AUTO SLEEP TIME
ON