Filter
Top Products
System Configuration
4-3
Optional Equipment
4
NOTE
•
Either the optional Platen Glass Type J or Feeder (DADF-P1) can be attached to the
main unit.
•
The optional Inner 2 Way Tray-E1 cannot be used with the optional Finisher-U1 and
Additional Finisher Tray-C1.
a Feeder (DADF-P1)
Originals placed in the feeder are automatically
fed sheet by sheet to the scanning area. The
feeder also automatically turns over two-sided
originals to make one- or two-sided copies.
b Additional Finisher Tray-C1
The Additional Finisher Tray-C1 can be attached
to the optional Finisher-U1 to provide an
additional paper output tray.
c Finisher-U1
The Finisher-U1 is equipped with the following
features: Collate, Offset, Group, and Staple.
d Cassette Feeding Module-J1
(For the imageRUNNER 2016 Only)
The Cassette Feeding Module-J1 provides an
additional paper source for printing jobs. The
paper drawer holds up to 250 sheets of paper
(20 lb bond (80 g/m
2
)).
e Cassette Feeding Module-K1
The Cassette Feeding Module-K1 provides two
additional sources of paper for printing jobs. Each
paper drawer holds up to 250 sheets of paper
(20 lb bond (80 g/m
2
)).
f Duplex Unit-A1
The Duplex Unit-A1 enables you to use the
Two-sided mode for copying or faxing.
g Fax Panel-A1 (with Super G3 FAX Board)
The Fax Panel-A1 and Super G3 FAX Board are
required to use the Fax function.
h Platen Cover Type J
The Platen Cover Type J secures the originals
placed on the platen glass.
i Card Reader-E1
The Card Reader-E1 enables Department ID
Management to be performed automatically.
j Document Tray-J1
Located on the top right side of the machine, and
can be used for originals waiting to be scanned,
or that have already been scanned. You can also
use the document tray for storing the manuals
required for operating the machine inside.
k Inner 2 Way Tray-E1
Prints can be delivered to both the main tray and
the Inner 2 Way Tray-E1.