Filter
Top Products
Feeder (DADF-P1) (Optional)
7-12
Routine Maintenance
7
Feeder (DADF-P1) (Optional)
Originals sent by fax via the feeder can be stamped to indicate that they have been
sent. Replace the stamp cartridge when this mark is faint or no longer visible.
IMPORTANT
When replacing the stamp cartridge, take care not to allow ink to come in contact with
your hands or clothing. If ink gets onto your hands or clothing, wash it off immediately
with water.
NOTE
The stamp cartridge is available only if the optional Super G3 FAX Board is attached.
Replacing the Stamp Cartridge
1
Open the feeder cover, then open the inner cover by holding
the green handle toward you.