Filter
Top Products
Feeder (DADF-P1) (Optional)
7-13
Routine Maintenance
7
2
Remove the old stamp cartridge using the tweezers.
NOTE
Widen the tweezers if necessary.
3
Insert a new stamp cartridge into the feeder until it clicks
using the tweezers.
IMPORTANT
•
Set the stamp cartridge so that the two projections on the cartridge are aligned with
the hollows on the feeder.
•
Be careful that the stamping surface of the stamp cartridge does not protrude.
•
Insert the stamp cartridge properly, or it may cause paper jams.