Filter
Top Products
Making Prints Using the Stack Bypass
2-14
Basic Operations
2
■ Standard Size
You can select standard inch paper, or A or B series paper.
■ Free Size
You can load nonstandard paper sizes (3 3/4" × 5 7/8" to 11 3/4" × 17" (95 mm × 148 mm
to 297 mm × 432 mm)).
■ Envelope
The following envelopes can be loaded into the stack bypass:
• COM10: 4 1/8" × 9 1/2" (104.7 mm × 241.3 mm)
• Monarch: 3 7/8" × 7 1/2" (98.4 mm × 190.5 mm)
• DL: 4 3/8" × 8 5/8" (110 mm × 220 mm)
• ISO-C5: 6 3/8" × 9" (162 mm × 229 mm)
• ISO-B5: 7" × 9 7/8" (176 mm × 250 mm)
For more information on specific envelope types, see "Available Paper Stock," on p. 2-24.
1
Open the stack bypass.
NOTE
If the paper size you are going to load into the stack bypass is different from the
paper size stored in <BYPASS STD SET> (Stack bypass standard settings), set
<BYPASS STD SET> to 'OFF' in COMMON SETTINGS (from the Additional
Functions menu). (See "Standard Paper for the Stack Bypass," on p. 5-30.)
● If the paper you want to specify is already loaded in the stack
bypass:
❑
Press [Paper Select] repeatedly until the indicator for the stack bypass lights.
❑ Proceed to step 4.
Paper Select