Filter
Top Products
5-48
Cisco 10008 Router Hardware Installation Guide
OL-0659-13
Chapter 5 Maintaining the Cisco 10008 Router
Upgrading SDRAM on the PRE
Place the PRE on an antistatic mat or pad so that the DIMMs are facing up (Figure 5-50).
Figure 5-51 Removing the DIMM
Step 2
Remove each DIMM from its slot by pushing its ejector tabs out to the side and lifting the DIMM straight
up (Figure 5-51).
Figure 5-52 Properly Handling a DIMM
Step 3
Remove a new DIMM from its antistatic bag (Figure 5-52).
1 Ejector tab
132838
1
1
1 Key
132842
1