A-3
Cisco 10008 Router Hardware Installation Guide
OL-0659-13
Appendix A Technical Specifications
For Specifications for Operating and Nonoperating Environments, see “Site Environmental Requirements”
section on page 2-2.
For technical specifications for the Cisco 10008 line cards, see the Cisco 10000 Line Card Hardware
Installation Guide.
For regulatory compliance and safety information, see the Regulatory Compliance and Safety
Information for the Cisco 10000 Series Routers document.
Performance routing engine
(PRE)
PRE PCMCIA Flash disk card
options
PRE DRAM memory options
• Part Number: ESR-PRE1 (Primary)
Part Number: ESR-PRE1/R (Redundant)
• Power: 80W
• Max per chassis: 2
• Weight: 7.5 lb (3.41 kg)
Height: 16.0 in. (40.64 cm)
Depth: 9.97 in. (25.32 cm)
Width: 1.91 in. (4.84 cm)
Three Interface ports:
• RJ-45 IEEE 802.3 Ethernet 100BASE-T
• RJ-45 auxiliary (AUX) port for modem access
• RJ-45 console (CON) port for terminal access
Two PCMCIA Flash card slots:
• Slot 0
• Slot 1
• 40 MB—Part Number: ESR-PRE-MEM-FD40
• 128 MB—Part Number: ESR-PRE-MEM-FD128
• 256 MB—Part Number: ESR-PRE-MEM-256M
• 512 MB—Part Number: ESR-PRE-MEM-512M
1. cfm = cubic feet per minute
2. Btu = British thermal units
Table A-1 Cisco 10008 Router System Specifications (continued)
Description Specifications