Filter
Top Products
3-35
Cisco 10008 Router Hardware Installation Guide
OL-0659-13
Chapter 3 Installing the Cisco 10008 Router
Connecting Network Management and Signal System Cables
Auxiliary Modem Connection
This asynchronous EIA/TIA-232 serial port is used to connect a modem to the PRE for remote
administrative access. Use the following procedure to connect the Cisco 10008 router to a modem.
Figure 3-35 Connecting Modem Cable to Auxiliary Port
Step 1 Connect one end of the modem cable to the RJ-45 port on the primary PRE, labeled AUX (Figure 3-35).
Step 2 Run the cable up and through the cable management bracket and connect the other end of the cable to
your modem.
Data Network Cable Connections
For data network cable connection installation information, SFP and GBIC information, cable
specifications and optical specifications, see the Cisco 10000 Series Routers Line Card Hardware
Installation Guide.
If you have completed all cable connections, go to the“Powering On the System” section on page 4-1,
Chapter 4, “Starting and Configuring the Router.”
CONSO
LE
ETHERNET
LINK
AUX
S
LO
T
0
S
L
O
T
1
CISCO
10000
LINK
33357