Chapter 3 Configuring Devices
Using the Templates
3-50
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01
Step 2 Enter the following information to identify the port:
Step 3 Select one of the following in the left pane:
• Preview to see your changes before you apply them. (See Previewing the
Template, page 3-131.)
• Finish to save the template. (See Finishing the Template, page 3-132.)
• Another template category to configure more options. (See Template
Categories, page 3-2.)
Setting Up Ethernet Filters
Use this option to define filters for the Ethernet port, the IP Protocol, and the IP
Port.
Table 3-12 Ethernet Port Settings
Field Description
Primary Port? From the list, select one of the following:
• Ethernet—Sets the Ethernet port for all
access points other than AP1200’s as the
primary port.
• Ethernet AP 1200—Sets the Ethernet
port for AP1200 access points as the
primary port.
• Radio 11b—Sets the 11b radio port as
the primary port.
• Radio 11a—Sets the 11a radio port as
the primary port.
Adopt Primary Port Identity? From the list, select one of the following:
• yes—This adopts the primary port
settings (MAC and IP addresses) for the
Ethernet port.
• no—This uses different MAC and IP
addresses for the Ethernet port.