Chapter 3 Configuring Devices
Using the Templates
3-62
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01
Enable “World Mode”
multi-domain operation?
From the list, select one of the following:
• yes—Allows the access point to add
channel carrier set information to its
beacon.
Client devices with world-mode enabled
receive the carrier set information and
adjust their settings automatically.
• no—Does not allow the access point to
add channel carrier set information to its
beacon.
Data Rates (Mb/sec)
1.0 From the list, select one of the following for
each of the four rates in megabits per second:
• basic—Allows transmission at this rate
for all packets, both unicast and
multicast. At least one data rate must be
set to basic.
• yes—Allows transmission at this rate for
unicast packets only.
• no—Does not allow transmission at this
rate.
2.0
5.5
11.0
Transmit Power From the list, select one of the following
milliwatt settings: 1, 5, 20, 30, 50, 100.
To reduce interference or to conserve power,
select a lower power setting.
Click see details to see which versions this
setting is valid for.
Table 3-18 11b Radio Hardware Settings (continued)
Field Description