Chapter 3 Configuring Devices
Using the Templates
3-74
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01
Procedure
Step 1 Select 11a Radio > Identification. The 11a Radio: Identification dialog box
displays in the right pane.
Step 2 Click see details to see which versions this option is valid for.
Step 3 Enter the following information to identify the port:
Note Clicking Clear removes all the current entries in the window and any
entries you have made in other Template windows up until that point.
Table 3-21 11a Radio Identification Settings
Field Description
Primary Port? From the list, select one of the following:
Note If the primary port was set using
Ethernet > Identification, the
selected value is displayed.
• Ethernet—Sets the Ethernet port for all
access points other than AP1200’s as the
primary port.
• Ethernet AP 1200—Sets the Ethernet
port for AP1200 access points as the
primary port.
• Radio 11b—Sets the 11b radio port as
the primary port.
• Radio 11a—Sets the 11a radio port as
the primary port.
Adopt Primary Port Identity? From the list, select one of the following:
• yes—This adopts the primary port
settings (MAC and IP addresses) for the
Ethernet port.
• no—This uses different MAC and IP
addresses for the Ethernet port.