Chapter 3 Configuring Devices
Using the Templates
3-54
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01
Procedure
Step 1 Select Ethernet > Advanced. The Ethernet: Advanced dialog box displays in the
right pane.
Step 2 Complete the following:
Note Clicking Clear removes all the current entries in the window and any
entries you have made in other Template windows up until that point.
Table 3-15 Ethernet Advanced Settings
Field Description
Status From the list, select one of the following:
• up— Enables the Ethernet port for normal operation.
• down—Disables the device’s Ethernet port.
Packet Forwarding From the list, select one of the following:
• enabled—Allows normal operation.
• disabled—Prevents data from moving between the
Ethernet and the radio, which is useful in
troubleshooting.
Default Multicast
Address Filter
From the list, select one of the following:
• allowed—The access point forwards all traffic
except packets sent to the MAC addresses set as
disallowed under Association > Address Filters.
• disallowed—The access point discards all traffic
except packets sent to the MAC addresses set as
allowed under Association > Address Filters.