Filter
Top Products
3-153
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01
Chapter 3 Configuring Devices
Automating Configurations
Step 2 Complete the following:
Step 3 Click Save to save the template.
Step 4 Click Delete to delete the template.
Creating a Startup Configuration Template
The startup configuration is used to bootstrap a device to allow the WLSE to
discover it.
Caution The startup configuration template is placed in tftpboot directory and anyone who
knows the file name can access it. This template should contain only minimal
feature settings.
To create a startup template select Configure > Templates. (To configure the
access point manually without using a startup configuration, see Set Up Access
Points and Bridges, page 6-12.)
Use the following table to guide you in creating a startup configuration template:
Field Description
Startup
Templates
Lists the startup templates that have been created.
Bootfile Name Enter the configuration file name that appears on the DHCP
server. This must have an .ini extension.
Description Enter a description for the configuration.
Configuration
Template
From the list select the startup template to assign to the
configuration file.
Click Details to see the device types and device versions
for which the template is valid.