3-9
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01
Chapter 3 Configuring Devices
Using the Templates
Procedure
Step 1 Select Association. The menu expands and the Association dialog box displays in
the right pane.
Step 2 Select one of the following from the Association menu:
• Spanning Tree—See Defining Spanning Tree Protocol, page 3-9.
• Address Filters—See Defining Address Filters, page 3-12.
• Ethertype Filters—See Defining Ethertype Filters, page 3-14.
• IP Protocol Filters—See Defining IP Protocol Filters, page 3-18.
• IP Port Filters—See Defining IP Port Filters, page 3-23.
• Policy Groups—See Configuring Policy Groups, page 3-28.
• VLANs—See Configuring VLANs, page 3-31.
• Quality of Service—See Configuring Quality of Service, page 3-36.
• Service Sets—See Configuring Service Sets, page 3-38.
• Advanced—See Defining Advanced Associations, page 3-42.
• Port Assignments—See Configuring Port Assignments, page 3-47.
• DSCP to CoS—See Configuring DSCP to CoS, page 3-48.
Defining Spanning Tree Protocol
This option is used for only bridges.
Procedure
Step 1 Select Association > Spanning Tree. The Association: Spanning Tree Protocol
dialog box appears.
Step 2 Click see details for information on which bridges this configuration is valid.