Filter
Top Products
3-103
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01
Chapter 3 Configuring Devices
Using the Templates
Configuring Start-Up Settings
Use this option to configure the access point for your network's BOOTP or DHCP
servers for automatic assignment of IP addresses.
Procedure
Step 1 Select Services > Start-Up. The Services: Start-Up dialog box appears.
Step 2 Complete the following:
Note Clicking Clear removes all the current entries in the window and any
entries you have made in other Template windows up until that point.
Table 3-30 Start-Up Settings
Field Description
Configuration Server Protocol From the list, select one of the following:
• None—Use this setting if your network
does not have an automatic system for IP
address assignment.
• BOOTP—Use this setting if IP addresses
are hard-coded based on MAC
addresses.
• DHCP—Use this setting if IP addresses
are “leased” for predetermined periods
of time.
Use prior Config Server settings
if no server responds?
From the list, select one of the following:
• yes—Use this setting to have the access
point save the boot server's most recent
response.
• no—Use this setting to not use the most
recent response.