Filter
Top Products
Appendix B Command Reference
Privilege Level 0 Commands
B-10
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01
• Italics indicate arguments for which you supply values.
Privilege Level 0 Commands
This section describes the privilege level 0 commands.
exit
To log out of the system, use the exit command.
exit
Syntax Description
This command has no arguments or keywords.
Example
The following command logs you out of the system:
exit
ping
To send ICMP echo_request packets for diagnosing basic network connectivity,
use the ping command.
ping [-c count] [-i wait] [-s packetsize] [-n] {hostname | ip-address}
Syntax Description
c Sets the number of echo packets to send.
count Number of echo packets to send.
i Sets the amount of time to wait between sending each packet.
wait Amount of time to wait between sending each packet, in
seconds. The default is 1.