Filter
Top Products
B-11
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01
Appendix B Command Reference
Privilege Level 0 Commands
s Sets the size of each echo packet.
packetsize The size of each echo packet, in bytes. The default is 56.
hostname Host name of system to ping.
ip-address IP address of system to ping.
n Disables reverse DNS lookup.
Usage Guidelines
To use this command with the hostname argument, DNS must be configured on
the system. To force the time-out of a nonresponsive host or to eliminate a loop
cycle, press Ctrl-c.
Example
This command sends 4 echo packets to the host otherhost with a wait time of
5 seconds between each packet:
ping -c 4 -i 5 209.165.200.224
PING 209.165.200.224 (209.165.200.224) from 209.165.201.0 : 56(84)
bytes of data.
64 bytes from dns-sj1.cisco.com (209.165.200.224): icmp_seq=0 ttl=246
time=16.3 ms
64 bytes from dns-sj1.cisco.com (209.165.200.224): icmp_seq=1 ttl=246
time=2.0 ms
64 bytes from dns-sj1.cisco.com (209.165.200.224): icmp_seq=2 ttl=246
time=2.1 ms
64 bytes from dns-sj1.cisco.com (209.165.200.224): icmp_seq=3 ttl=246
time=2.1 ms
show clock
To display the system date and time in Coordinated Universal Time (UTC), use
the show clock command.
show clock
Syntax Description
This command has no arguments or keywords.