Filter
Top Products
Glossary
GL-2
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01
C
CDP
Cisco Discovery Protocol. Media- and protocol-independent device-discovery
protocol that runs on all Cisco-manufactured equipment, including routers,
access servers, bridges, and switches. Using Cisco Discovery Protocol, a device
can advertise its existence to other devices and receive information about other
devices on the same LAN or on the remote side of a WAN. Runs on all media
that support SNAP, including LANs, Frame Relay, and ATM media.
CDP distance
The CDP distance determines the depth of the discovery and applies to all seed
devices. If CDP distance is 1, only the immediate neighbors of the seed device
are discovered. If CDP distance is 2, devices A and B that are directly connected
to the seed devices are discovered and the immediate neighbors of A and B are
also discovered.
CLI
The command line interface for administering the WLSE. You use the CLI
through a console attached to the WLSE’s console port or by opening a Telnet
connection to the WLSE. CLI commands are described in the User Guide for the
CiscoWorks 1105 Wireless LAN Solution Engine—from the online help, click
PDF.
community strings
Text strings that act as passwords to authenticate communication with devices
that contain an SNMP agent.
CoS
Class or Service. An indication of how an upper-layer protocol requires a
lower-layer protocol to treat its messages.
CSR
Certificate Signed Request. Request sent to a certificate authority for using
HTTPS.
D
DHCP
Dynamic Host Configuration Protocol. Provides a mechanism for allocating IP
addresses dynamically so that addresses can be reused when hosts no longer
need them.