Filter
Top Products
3-41
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01
Chapter 3 Configuring Devices
Using the Templates
Step 2 Click Add to add the Service Set to the Service Sets to Add list.
Step 3 To delete a group from the list, select the name, then click Delete.
Step 4 Select one of the following in the left pane:
• Preview to see your changes before you apply them. (See Previewing the
Template, page 3-131.)
• Finish to save the template. (See Finishing the Template, page 3-132.)
• Another template category to configure more options. (See Template
Categories, page 3-2.)
Shared From the list, select one of the following:
• Yes—Use this option if you use shared and EAP
authentication to block client devices that are not
using EAP from authenticating through the access
point.
• No—Use this option if you do not use shared and
EAP authentication.
Default Unicast Address Filter
Open From the list, select one of the following:
• Allowed—The access point forwards all traffic
except packets sent to the MAC addresses set as
disallowed with the Address Filters.
• Disallowed—The access point discards all traffic
except packets sent to the MAC addresses set as
allowed with the Address Filters or on your
authentication server.
Select Disallowed for each authentication type that
also uses MAC-based authentication.
Shared
Network-EAP
Table 3-9 New Service Set Settings (continued)
Field Description