Filter
Top Products
3-29
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01
Chapter 3 Configuring Devices
Using the Templates
Procedure
Step 1 Select Association > Policy Group. The Association: Policy Group dialog box
appears.
Step 2 Click see details to see which versions this option is valid for.
Note Clicking Clear removes all the current entries in the window and any
entries you have made in other Template windows up until that point.
Step 3 Using this option you can:
• Add and delete a policy group—See Adding or Deleting a New Policy Group,
page 3-29.
• Delete an exiting Policy Group From a Device—See Deleting an Existing
Policy Group from a Device, page 3-30.
Adding or Deleting a New Policy Group
Step 1 To add a new policy group, enter the following:
Field Description
GroupID Enter an identification number for the policy group.
Group Name Enter a name for the policy group.
Ethertype
Receive Enter the ID of a defined Ethertype filter, or select one of
the filters you created using Association > Ethertype
Filters.
Transmit Enter the ID of a defined Ethertype filter, or select one of
the filters you created using Association > Ethertype
Filters.
IP Protocol