Filter
Top Products
Chapter 5 Receiving Faxes 5-1
Receiving Faxes
The MultiPASS C3000 has four Receive Modes:
❍ Fax Only Mode
❍ Fax/Tel Mode
❍ Manual Mode
❍ Answer Machine Mode
You set the Receive Mode during the Automatic Installation procedure.
(See your Setup Guide for details.)
You can change the Receive Mode and the Receive Fax options through
the MultiPASS Desktop Manager. See page 8-7 for details.
Receiving Documents
During reception of a fax:
❍ If the unit runs out of paper or if the BJ cartridge runs out of ink,
the MultiPASS C3000 receives the remainder of the document in
memory.
❍ To stop receiving before the document is complete, press STOP.
❍ If the ALARM light is flashing for any reason, correct the error and
then press STOP. If necessary, see Chapter 10, Troubleshooting.
❍ If an error occurs, the MultiPASS C3000 beeps intermittently for a
few seconds. If this happens, contact the other party and have them
resend the document.
MP-C3000—USERS MANUAL/V1/03-97
5
Receiving Faxes