Filter
Top Products
Chapter 9 Maintaining the MultiPASS C3000 9-19
Transporting the MultiPASS C3000
If you need to transport the MultiPASS C3000, be very careful.
DDOO NNOOTT
remove the BJ cartridge.
❍ With the cartridge holder on the right side of the unit,
tape the BJ cartridge and cartridge holder to the side of
the unit.
❍ Unplug the power cord.
❍ Disconnect the telephone lines and parallel cable.
❍ Remove the sending document support.
❍ Remove the document support and output tray
extension.
❍ Carefully pack the unit in its original packing materials.
❍ Do not remove the BJ cartridge from the MultiPASS
C3000 or ship a BJ cartridge or a BJ tank from which you
have removed the protective cap. An opened BJ cartridge
or BJ tank that is not installed in the MultiPASS C3000 or
the Ink Cartridge Storage Box may leak, and the
print head may dry out. Also, if you do not tape the
BJ cartridge to the side of the unit, ink may spill into the
MultiPASS C3000.
N
If you no longer have the shipping carton your MultiPASS C3000 came
in, pack the unit in a suitably sized, sturdy cardboard box, using bubble
wrap, foam peanuts, or other suitable packing materials.
Pack the unit.
4
Lower the paper
rest and remove
all trays.
3
Disconnect
all cables.
2
Make sure the
BJ cartridge is in
the home position.
1
MPC-3000—USERS MANUAL/V000/07-97
Maintaining the
MultiPASS C3000