Filter
Top Products
Appendix B Using the MultiPASS C3000 as a Stand-alone Fax B-1
Stand-alone Fax
If you plan to use the MultiPASS C3000 as a stand-alone fax, and you do
not install the MultiPASS Desktop Manager, you must enter your name
and fax number from the operator panel. If you choose to use the
MultiPASS C3000 this way, you will not be able to use its many features,
such as speed dialing, PC faxing, or scanning. Canon recommends that
you install the MultiPASS Desktop Manager as described in the Setup
Guide. See Chapter 3 for details on using the MultiPASS Desktop
Manager.
LCD Menu System
Default settings are shown in
bboolldd..
Option Description/Settings
DATE & TIME Set the date and time (24-hour clock) using the
numeric buttons.
UNIT TELEPHONE # Enter your fax number using the numeric
buttons (up to 20 characters).
UNIT NAME Enter the name you want to appear at the top of
each fax page you send (up to 24 characters).
TEL LINE TYPE Sets the dialing method the MultiPASS C3000
uses to match the type of phone line you have.
TTOOUUCCHH TTOONNEE
or ROTARY/PULSE
FILE PRINT Prints documents stored in the MultiPASS
memory (when the MultiPASS Desktop
Manager is installed).
CLEANING Cleans the BJ cartridge print head.
NOZZLE CHECK Prints a test pattern to check whether the
BJ cartridge is functioning normally.
MPC-3000—USERS MANUAL/V000/07-97
B
Using the MultiPASS C3000
as a Stand-alone Fax