Filter
Top Products
Chapter 1 Introduction 1-7
MPC-3000—USERS MANUAL/V000/07-97
Introduction
RESOLUTION button
Press this to select the resolution the MultiPASS C3000 will use for the
document you want to fax or copy.
One-Touch Speed Dial/Function buttons
Use for one-touch speed dialing, entering user information, printing
documents stored in memory, and cleaning the print head.
FUNCTION button
Use to register user settings, to run the print head cleaning process, or to
print faxes stored in the MultiPASS C3000s memory.
CARTRIDGE button
Press to move the BJ cartridge holder to the center of the printer unit
when installing or replacing the cartridge. (Press again after installing
the cartridge to move the holder back to its home position.)
RESUME button
Press when you want to resume printing.
PRINTER RESET button
Press to reset the printer.
Arrow buttons
Use to scroll through menu selections, or to move the cursor when
registering data.
STOP button
Press to cancel sending, receiving, or any other operation.
ALARM lamp
Flashes when an error occurs, when the MultiPASS is out of paper or
ink, or when received faxes are stored in memory.
START/COPY button
Press to begin sending, receiving, copying, or other operations, or to
select functions when registering information.
CODED DIAL button
Press this button (followed by a two-digit code) to dial a number that
you have registered for coded speed dialing.
Number buttons
Use these buttons to enter numbers and names when registering
information, and to dial fax/telephone numbers that are not registered
for automatic dialing.
14
5
6
7
8
9
10
12
13
11
15
4