Filter
Top Products
❍ While holding the operator panel open, remove the
document.
❍ Pull it in either direction, but DO NOT force it.
❍ If a multi-page document is loaded, remove the entire
document from the ADF.
❍ Gently press the operator panel until it clicks closed.
❍ Fan and stack the sheets, and replace the stack in the
ADF.
❍ Start your operation again.
Close the
operator panel.
4
Remove the
document.
3
10-4 Troubleshooting Chapter 10
MPC-3000—USERS MANUAL/V000/07-97
ADF_JAM