Filter
Top Products
Section 7 COPIER MANAGEMENT
7-36
Fax function management ON/OFF
Perform the following procedure when you want to turn copy
management ON or OFF for the fax functions of this machine.
NOTE
This setting is only available when the optional Fax Kit is
installed in your copier.
1
Select “Fax Management” under the “Setting item” column
on the left side of the touch panel and then press the
“Change #” key.
The “Fax Management” screen will be displayed.
Inch specifications
Metric specifications
2
To turn copy management ON for the fax functions of this
machine, press the “On” key.
Inch specifications
Metric specifications
NOTE
If you want to quit the displayed setting without changing
it, press the “Back” key. The touch panel will return to the
screen in step 1.
3
Press the “Close” key.
The touch panel will return to the screen in step 1.
Close
Change #
Default setting - Management - Management Def. setting
Management Def. setting
ValueSetting item
Scanner Management
Fax Management
Excess of limit Setting
Def. Val. of coun. limit
Total size 1
Total size 2
Total size 3
On
On
Unable to use
999999
8
1
/
2
x11" No specif.
11"x17" No specif.
8
1
/
2
x11" No specif.
Close
Change #
Default setting - Management - Management Def. setting
Management Def. setting
ValueSetting item
Scanner Management
Fax Management
Excess of limit Setting
Def. Val. of coun. Limit
Total size 1
Total size 2
Total size 3
On
On
You cannot use
999999
A3 No specif.
A4 No specif.
B4 No specif.
CloseBack
Default setting - Management - Management Def. setting
Fax Management
Fax management can be set up.
Off
On
CloseBack
Default setting - Management - Management Def. setting
Fax Management
Fax management can be set up.
Off
On