Filter
Top Products
Section 7 COPIER MANAGEMENT
7-38
Default copy limit
Perform the following procedure when you want to change the
default copy limit for new department ID-codes.
1
Select “Def. Val. of coun. limit” under the “Setting item”
column on the left side of the touch panel and then press
the “Change #” key.
The “Def. Val. of coun. limit” screen will be displayed.
Inch specifications
Metric specifications
2
Use the numeric keys on the keypad to enter the default
copy limit. The limit can be set to any 1-page increment up
to 999,999.
Inch specifications
Metric specifications
NOTE
If you want to quit the displayed setting without changing
it, press the “Back” key. The touch panel will return to the
screen in step 1.
3
Press the “Close” key.
The touch panel will return to the screen in step 1.
Close
Change #
Default setting - Management - Management Def. setting
Management Def. setting
ValueSetting item
Scanner Management
Fax Management
Excess of limit Setting
Def. Val. of coun. limit
Total size 1
Total size 2
Total size 3
On
On
Unable to use
999999
8
1
/
2
x11" No specif.
11"x17" No specif.
8
1
/
2
x11" No specif.
Close
Change #
Default setting - Management - Management Def. setting
Management Def. setting
ValueSetting item
Scanner Management
Fax Management
Excess of limit Setting
Def. Val. of coun. Limit
Total size 1
Total size 2
Total size 3
On
On
You cannot use
999999
A3 No specif.
A4 No specif.
B4 No specif.
CloseBack
Default setting - Management - Management Def. setting
Def. Val. of coun. limit
clear
999,999
(1~999,999)
Default value of counter limit can be set.
Limited value
CloseBack
Default setting - Management - Management Def. setting
Def. Val. of coun. Limit
clear
999,999
(1~999,999)
Default value of counter limit can be set.
Limited value