Filter
Top Products
Section 6 OTHER CONVENIENT FUNCTIONS
6-35
8
If you want to add covers, press the “Copy on front cvr”
[“Copy on front cov.”] key.
The “Copy on front cover” screen will be displayed.
At this point, if you do NOT want to copy onto the covers, go
directly to step 10.
Inch specifications
Metric specifications
9
Press the “On” key.
Inch specifications
Metric specifications
IMPORTANT!
If you DO want to copy onto the covers, be absolutely
certain to set the original that you want to have copied
onto the cover first.
10
Press the [Start] key.
Scanning of the originals will start.
When a message appears telling you to set the next
original, go to the next step.
11
Replace the first original with the next one and press the
[Start] key.
Scanning of that next original will start.
12
Once you have finished scanning all of the originals, press
the “Scanning finished” key.
Copying will start.
Booklet
None
Booklet
Book
Booklet
Book
Left
Book
Right
Open from
left
Copy on
front cvr
Open from
right
Original Finished Copy front
None
Check direction
Set the book original
top side direct to rear.
Set first page.
Press "Start" key.
Paper Size
Set
BackRegister Close
11x8
1
/2
Saddle
Stitch
None
Booklet
None
Booklet
Book
Booklet
Book
Left
Book
Right
Left
binding
Copy on
front cov.
Right
binding
Original Finished Copy front
None
Check direction
Set book original top
side direction to back.
Paper Size
Set
BackRegister Close
Set first page.
Press "START" key.
Center
Staple
None
Set first page.
Press "Start" key.
Paper Size
Set
Back Close
Check direction
Set the book original
top side direct to rear.
Copy on front cover
Off
On
When selecting "ON" for copying on the
front cover, follow the instruction.
1.Scan front cover book original.
2.Start scan book originals.
11x8
1
/2
Paper Size
Set
Back Close
Check direction
Set book original top
side direction to back.
Copy on front cover
Off
On
When selecting "ON" for copying on the
front cover, follow the instruction.
1.Scan front cover book original.
2.Start scan book originals.
Set first page.
Press "START" key.