Filter
Top Products
Section 7 COPIER MANAGEMENT
7-56
3
Press the key that corresponds to the desired location.
Inch specifications
Metric specifications
NOTES
• If you want to quit the displayed setting without
changing it, press the “Back” key. The touch panel will
return to the screen in step 2.
• When an optional Document Finisher is installed,
Select “Top Tray” and “Finisher.” When the Multi Job
Tray is installed, you can select from among “Top Tray,”
“Tray A,” and “Tray 1” through “Tray 5.”
4
Press the “Close” key.
The touch panel will return to the screen in step 2.
5
Press the “Close” key once again.
The touch panel will return to the “Default setting” screen.
6
Press the “End” key.
The touch panel will return to the contents of the “Basic”
tab.
Default operation mode
Perform the following procedure to set whether the display that
appears after power is turned on to the copier will be the one for
the copy operation mode or for the fax operation mode.
NOTE
This setting is only available when the optional Fax Kit is
installed in your copier.
1
Display the “Machine default” screen.
(See “Accessing the machine default settings” on
page 7-45.)
Inch specifications
Metric specifications
2
Select “Select the main mode” [“Select main mode”] under
the “Default menu” column on the left side of the touch
panel and then press the “Change #” key.
The “Select the main mode” [“Select main mode”] screen
will be displayed.
Inch specifications
Metric specifications
CloseBack
Default setting - Machine default
Set the default fax output destination.
Select FAX output mode
Top tray
Tray1
Tray2
TrayA
Tray3
Tray5
Tray4
CloseBack
Default setting - Machine default
Set the default fax output destination.
Select FAX output mode
Top tray
Tray1
Tray2
TrayA
Tray3
Tray5
Tray4
End
Default setting / Counter
Default setting
Copy
default
Machine
default
Counter
check
User
Adjustment
Language
Bypass
setting
Register
orig. size
Management
Print
report
End
Default setting/ Counter
Default setting
Copy
default
Machine
default
Counter
check
User
Adjustment
Language
Bypass
setting
Register
orig. size
Management
Print
report
Default setting / Counter
Close
Up
Down
Change #
Setting modeDefault menu
Default setting
Machine default
Select FAX output mode
Select the main mode
Key sound ON/OFF
Date/Time
Time difference
Top tray
Copy mode
On
GMT+09:00
03/09/03 14:00
Default setting/ Counter
Close
Up
Down
Change #
Setting modeDefault menu
Default setting
Machine default
Select FAX output mode
Select main mode
Key sound ON/OFF
Date/Time
Time difference
Top tray
COPY mode
On
GMT+09:00
03/09/03 14:00