ColorVision c2630D All in One Printer User Manual


 
Section 7 COPIER MANAGEMENT
7-44
Day & time Sets the current date and time. Year: 2001 – 2049
Month: 1 – 12
Day: 1 – 31
Time: 00:00 – 23:59
The time is set at
the factory
7-58
Time difference Sets the time difference from the world standard time
(GMT).
+12:00 – -12:00 00:00 7-59
Changing the
management code
Changes the management code that is used by the copy
manager.
IMPORTANT:
* If you change the management code from its factory
default, be sure to keep some sort of record of the new
management code. If, for any reason, you forget the
registered management code, you will need to contact your
service representative.
0000 – 9999 2600 7-60
Auto sleep ON/OFF Sets whether or not to have the auto sleep function
automatically turn the power switch OFF a certain amount
of time after copying, or if no operation has been performed
on the copier during that time.
* If auto sleep interferes with your copying operations, turn
this function OFF. However, it is recommended that you
try to set a longer time interval until auto sleep engages
before you actually turn it OFF.
On / Off On 7-61
Color/B&W Mix
[Colour/B&W Mix]
Sets the priority mode when copying a document that mixes
color and monochrome
Color priority:
Color copy cyan, magenta, yellow, and black mechanisms are
operated, regardless of original type. Use this setting to give
precedence to copy speed.
B&W priority:
Only the black mechanism is operated when making black
and white copies.
Color priority
[Colour priority]
B&W priority
B&W priority 7-62
High Density Print Sets the priority mode for continuous copying of high-density
documents.
Fast Mode: Puts priority on copy speed.
Quality Mode: Puts priority on copy quality. Copy
speed is slower.
High Quality Mode: Punts maximum priority on copy
quality for printing photographs and
other high-density documents. Copy
speed is even slower than with the
“Quality Mode” setting.
Fast Mode
Quality Mode
High Quality Mode
Fast Mode 7-63
Default setting Description
Available
settings
Factory
setting
Reference
page