Filter
Top Products
Section 7 COPIER MANAGEMENT
7-39
Total count for specified paper size (1 to 5)
Perform the following procedure when you want to register a
specific paper size in order to calculate and check the copy counts
for that particular size of paper. It is also possible to register a
paper size AND type.
NOTES
• You can register up to 5 different paper sizes for this
function.
• If the type of paper is not registered in any of the
settings, the corresponding copy counts for that size of
paper will be calculated regardless of the type of paper
that is used. However, if the same size of paper is
registered in another setting along with a paper type,
the counts for the first setting will NOT include copies
made with the type of paper that is registered in the
second setting.
1
Select one of the “Total size 1” through “Total size 5”
settings under the “Setting item” column on the left side of
the touch panel and then press the “Change #” key.
The corresponding setting screen will be displayed.
Inch specifications
Metric specifications
2
Press the “On” key.
Inch specifications
Metric specifications
3
Press the “Select size” key.
Inch specifications
Metric specifications
NOTE
If you want to quit the displayed setting without changing
it, press the “Back” key. The touch panel will return to the
screen in step 1.
Close
Change #
Default setting - Management - Management Def. setting
Management Def. setting
ValueSetting item
Scanner Management
Fax Management
Excess of limit Setting
Def. Val. of coun. limit
Total size 1
Total size 2
Total size 3
On
On
Unable to use
999999
8
1
/
2
x11" No specif.
11"x17" No specif.
8
1
/
2
x11" No specif.
Close
Change #
Default setting - Management - Management Def. setting
Management Def. setting
ValueSetting item
Scanner Management
Fax Management
Excess of limit Setting
Def. Val. of coun. Limit
Total size 1
Total size 2
Total size 3
On
On
You cannot use
999999
A3 No specif.
A4 No specif.
B4 No specif.
Off
On
CloseBack
Default setting - Management - Management Def. setting
Total size 1
Can set totals of paper size and type.
Off
On
CloseBack
Default setting - Management - Management Def. setting
Total size 1
Can set totals of paper size and type.
CloseBack
Default setting - Management - Management Def. setting
Total size 1
Can set totals of paper size and type.
Off
On
Select
size
Select
paper type
Paper size Paper type
With no
specif.
8
1
/
2
x11"
CloseBack
Default setting - Management - Management Def. setting
Total size 1
Can set totals of paper size and type.
Off
On
Select
size
Select
paper type
Paper size Paper type
With no
specif.
A4