Filter
Top Products
Section 3 PREPARATIONS
3-2
Loading paper into drawer[cassette]
You can load up to 500 sheets of standard paper
(Inch specifications: 60 g/m
2
– 105 g/m
2
[Metric specifications:
60 g/m
2
– 90 g/m
2
]) or color paper into the drawer [cassette].
• Standard drawer [cassette]
• Acceptable sizes of paper
IMPORTANT!
• BE SURE to use paper that is specified for color copy
use in order to make clear color copies.
• DO NOT use paper such as that designated for inkjet
printers or any paper treated with special coating.
• Specify the type of paper that is loaded into each
drawer[cassette] (plain, recycled, etc.) under “Paper
type (drawer[cassette] No.1 - No.4)” on page 7-48.
1
Pull the drawer[cassette] out toward you as far as it will go.
NOTE
DO NOT pull more than one drawer[cassette] out at a
time.
2
Pinch the levers for the paper width guide plates and move
the plates to fit the width of the paper that is to be loaded
in that drawer[cassette].
The paper sizes are marked on the bottom of the
drawer[cassette].
3
Pinch the levers for the paper length guide plate and move
the plate to fit the length of the paper that is to be loaded in
that drawer[cassette].
The paper sizes are marked on the bottom of the
drawer[cassette].
1-sided copier: One 500-sheet drawer [cassette]
Duplex copier: Drawer [cassette] supplied as option.
11" × 17", 8
1/2" × 14", 8 1/2" × 11", 11" × 8 1/2", 5 1/2" × 8 1/2", Folio,
A5R, B5R, B5, A4R, A4, B4 and A3