Filter
Top Products
Section 7 COPIER MANAGEMENT
7-61
3
Use the keypad to enter a new 4-digit management code.
Inch specifications
Metric specifications
NOTE
If you want to quit the displayed setting without changing
it, press the “Back” key. The touch panel will return to the
screen in step 2.
4
Press the “Close” key.
The touch panel will return to the screen in step 2.
5
Press the “Close” key once again.
The touch panel will return to the “Default setting” screen.
6
Press the “End” key.
The touch panel will return to the contents of the “Basic”
tab.
Auto sleep ON/OFF
Perform the following procedure to set whether or not to have the
auto sleep function automatically turn the power switch OFF a
certain amount of time after copying, or if no operation has been
performed on the copier during that time.
1
Display the “Machine default” screen.
(See “Accessing the machine default settings” on
page 7-45.)
Inch specifications
Metric specifications
2
Select “Auto sleep” under the “Default menu” column on the
left side of the touch panel and then press the “Change #”
key.
The “Auto sleep” screen will be displayed.
Inch specifications
Metric specifications
CloseBack
Management code change
Default setting - Machine default
Able to change management code.(# key)
CloseBack
Change MGMT code with #
Default setting - Machine default
Able to change management code. (# key)
End
Default setting / Counter
Default setting
Copy
default
Machine
default
Counter
check
User
Adjustment
Language
Bypass
setting
Register
orig. size
Management
Print
report
End
Default setting/ Counter
Default setting
Copy
default
Machine
default
Counter
check
User
Adjustment
Language
Bypass
setting
Register
orig. size
Management
Print
report
Default setting / Counter
Close
Up
Down
Change #
Setting modeDefault menu
Default setting
Machine default
Time difference
Management code change
Auto sleep
Color/B&W Mix
High Density Print
GMT+09:00
2600
On
Color priority
Fast Mode
Default setting/ Counter
Close
Up
Down
Change #
Setting modeDefault menu
Default setting
Machine default
Time difference
Change MGMT code with #
Auto sleep
Colour/B&W Mix
High Density Print
GMT+09:00
2600
On
Colour priority
Fast Mode