Filter
Top Products
Section 6 OTHER CONVENIENT FUNCTIONS
6-29
With this mode, you can use 1-sided or 2-sided originals to make
open-faced, two-sided copies in such a way that the finished copies
can be stacked and folded into a booklet format. You can also select
to have color paper or relatively thick paper fed as front and/or
back covers to the copy sets.
NOTES
• This mode is only available in duplex copiers.
• Stapling of copies is also possible when an optional
Document Finisher is installed. When the optional
Folder Unit is installed, copies can also be folded and
stapled.
• It is possible for you to change the drawer[cassette] that
will be used to feed the cover sheets. (See “Cover
drawer[cassette]” on page 7-80.)
Inch specifications
•Only 8
1/2" × 11", 11" × 8 1/2", 11" × 17", B5R, A4, B4 or
A3 size copy paper can be used in this mode.
Metric specifications
• Only B5R, A4R, A4, B4, A3, 11" × 8
1/2" or 11" × 17" size
copy paper can be used in this mode.
If “Left” is selected as the binding direction...
Copying will be performed so that the stacked and folded pages of
the finished copies read from left to right.
If “Right” is selected as the binding direction...
Copying will be performed so that the stacked and folded pages of
the finished copies read from right to left.
If “Top” is selected as the binding direction...
Copying will be performed so that the stacked and folded pages of
the finished copies read from top to bottom.
If you choose to add covers to your copy set(s)
It is possible for you to select whether or not to copy onto the front
and/or back cover sheets.
NOTES
• The asterisk “ ” indicates the side of the cover on
which copying will be accomplished.
• The illustrations above are an example of when “Left” is
selected as the binding direction.
Making booklets from sheet originals [Booklet/Stitching mode]
(Only available in duplex copiers)
Original Copy
Original Copy
Front cover Back cover
Do NOT copy
Copy on outside
Copy on inside
Copy on both
sides
Original Copy
Original Copy