Filter
Top Products
Control panel message Description Recommended action
59.XY
PRINTER ERROR
For help press
alternates with
59.XY
PRINTER ERROR
To continue
turn off then on
A printer motor error has occurred.
A startup error occurs when the rotation
of the motor does not reach the specified
speed.
A rotation error occurs when the number
of rotations (speed) runs out of the
specified range.
X Description
0 for motor error
1 for motor startup error
2 for motor rotation error
3 for fuser motor startup error
4 for fuser motor rotation error
5 for image drum motor startup error
6 for image drum motor rotation error
7 for developer motor startup error
8 for developer motor rotation error
9 for ETB/ITB motor startup error or
missing fuser
9 for T2 clutch error
A for ETB/ITB motor rotation error
B for developer alienation motor startup
error
C for developer alienation rotation
startup error (bi-abnormality of developer
alienation motor)
D for registration motor starting error
E for registration motor rotation error
Y Description
0 for black/no color
1 for Cyan
2 for magenta
3 for yellow
9 for T2 clutch error
1. Turn the printer off and then back on.
2. If the problem persists, contact
HP Support at http://www.hp.com/
support/clj4610.
Note: This message might also
appear if the transfer unit is missing
or incorrectly installed. Ensure that
the transfer unit is correctly installed.
62 NO SYSTEM
To continue
turn off then on
No system was found. 1. Turn the printer off and then back on.
2. If the problem persists, contact
HP Support at http://www.hp.com/
support/clj4610.
Control panel messages (continued)
ENWW Control panel messages 137