Filter
Top Products
Loading custom-sized media into Tray 2
The Custom media menu will be displayed when the Tray 2 switch is in the Custom size
position. You must also change the size setting on the control panel to custom and set the
unit of measure, X dimension, and Y dimension. See
To configure a tray to match print job
settings for more information.
1. Remove tray from the printer.
2. Move the tray switch to the CUSTOM size position. Once a custom size is set for a tray,
it will be retained until the switch is moved back to STANDARD or until you manually
change the configuration.
3. Slide the media width guides all the way open and adjust the rear media-length guide to
the length of the paper being used.
ENWW Configuring input trays 83