Filter
Top Products
Menu item Description
PAPER PATH TEST Generates a test page that is
useful for testing the paper-
handling features of the printer.
Press
(S
ELECT
button) to start
the paper-path test using the
source (tray), destination
(output bin), duplex, and
number of copies settings that
you set in the other items on
the PAPER PATH TEST menu.
Set the other items before
selecting PRINT TEST PAGE.
SOURCE: Select the tray that
uses the paper path that you
want to test. You can select
any tray that is installed. Select
ALL TRAYS to test all tray
paper paths. Paper must be
loaded in the selected trays.
DESTINATION: Select the
output bin that uses the paper
path that you want to test. You
can select any output bin that is
installed. Optional bins (stacker
or stapler/stacker bin) must
also be correctly configured in
the printer driver. Select ALL
BINS to test all paper paths.
COPIES: Set how many sheets
of paper are used from each
tray during the paper-path test.
If you are testing the optional
stapler/stacker (DESTINATION
item), select 10 or more sheets.
MANUAL SENSOR TEST This item performs a test to
determine whether the paper
path sensors are operating
correctly.
COMPONENT TEST This item will activate individual
parts independently to isolate
noise, leaking, and other
hardware issues.
PRINT/STOP TEST This item isolates print quality
faults more accurately by
stopping the printer in mid-print
cycle. Stopping the printer in
mid-print cycle allows you to
see where the image begins to
degrade. Stopping the printer in
mid-print cycle will cause a jam
that may need to be manually
removed. A service
representative should perform
this test.
ENWW Diagnostics menu 47