Filter
Top Products
CAUTION
Do not print cardstock, envelopes, heavy or extra heavy paper, or unsupported sizes of
media from Tray 2. Print on these types of media only from Tray 1. Do not overfill the input
tray or open it while it is in use. Doing so can cause jams in the printer.
1. Remove the tray from the printer. Move the CUSTOM/STANDARD switch to the
STANDARD position.
2. Adjust the rear media-length guide by squeezing the guide adjustment latch and sliding
the back of the tray to the length of the media being used.
3. Push down the media lift plate until it locks.
ENWW Configuring input trays 79