Compaq LaserJet 4610n Printer User Manual


 
Control panel message Description Recommended action
NON HP SUPPLY
IN USE
alternates with
Ready
The supplies gauge will display the
consumption levels of print
cartridges, but the level of any
refilled cartridge will not be shown.
The printer has detected that a non-HP
print cartridge is currently installed.
If you believe you purchased an HP
cartridge, please call the HP fraud hotline.
CAUTION
Any printer repair required as a result of
using non-HP cartridges is not covered
under HP warranty.
ORDER <COLOR>
CARTRIDGE
The supplies gauge will display the
consumption levels of print
cartridges.
alternates with
Ready
The supplies gauge will display the
consumption levels of print
cartridges.
The identified print cartridge is nearing
the end of its useful life. The printer is
ready and will continue for the estimated
number of pages indicated. Estimated
pages remaining is based upon the
historical page coverage of this printer.
Printing will continue until a supply
needs to be replaced.
1.
Press
to view help for the
message.
2. Obtain the part number for the print
cartridge indicated.
3. Order a print cartridge
ORDER FUSER KIT
LESS THAN XXX PAGES
For help press
alternates with
Ready
The fuser is near end of life. The printer
is ready and will continue for the
estimated number of pages indicated.
Printing will continue until a supply
needs to be replaced.
1.
Press
to view help for the
message.
2. Obtain the part number for the fuser
kit.
3. Order the fuser kit.
ORDER SUPPLIES
alternates with
Ready
For help press
The supplies gauge will display the
consumption levels of print
cartridges.
More than one supply item is low.
Printing will continue until a supply
needs to be replaced.
1. Press M
ENU
to access the menus.
2. Press
or to highlight
INFORMATION, and then press
.
3. Press
or to highlight
SUPPLIES STATUS, and then
press
.
4. Press
or to highlight a supply
that needs to be ordered.
5.
Press
to access help for the
supply.
6. Obtain a part number from help.
7. Order the supply.
8. Repeat the previous steps as
necessary for each supply that
needs to be ordered.
Control panel messages (continued)
ENWW Control panel messages 145